Fibre Glass Tape (fiberglass products manufacturer)

Product name: Fiber Glass Self-adhesive Tape
1. Woven by platinum pot yarn
2. Glue content of the mesh above 18%
3. Erosion-resistant
Specification:
1. Mesh size: 9X9mesh/inch(2.85 X 2.85mm), 8X8mesh/inch, (3.2X3.2mm) 10X10mesh/inch (2.5X2.5mm), and other sizes as per your request
2. Weight per square meter: 50G/M2, 60G/M2, 65G/M2, 70G/M2, 75G/M2, 80G/M2
3. Length each roll: 10m, 20m, 45m, 75m, 90m, 150m etc.
4. Width one roll: 35mm, 45mm, 50mm, 75mm, 10mm, 20mm etc.
5. Color: White, yellow, and others
6, Package: Each roll in shrink wrapping, 24rolls-72roll in one carton
7. Customized demand can be met
Application:
Virtually, any commercial or residential application of drywall for repairing the cracks and joints or holes of drywall, plasterboard, stucco etc.
Installation:
1. Wall must be clean and dry;
2. Center and apply tape over the length of the joint and pressing firmly;
3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.
4. Let dry completely, then sand slightly.
5. Apply sufficient thin finishing coats to produce a smooth wall surface.
6. Cut of butted boards does not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.
Caution:
1. Failure to completely fill the joint may result in cracking
2. For best results, use a setting-type compound