Centrifugal AH Slurry Pump, Gland Seal

 Series  AH slurry Pump
 Specifications:
Parts Material: A05, A31, A33, A49
Slurry pump for mining, power, metallurgical
 

1. horizontal slurry pump Application:

AH series slurry pumps are used for delivering the fine particles and corrosive slurry for

metallurgical, mining, coal, petroleum, chemical, transportation, river, Channel dredging

building material and municipal projects, etc.
 

2. horizontal slurry pump Technological Characteristic:

1. Double casing structure:wear resistant layer and bearing layer can be separated

2. The discharge outlet can be adjusted with rotation interval of 45 degree.

3. The shaft seal can adopt expeller type shaft sealing, gland packing assembly and

mechanical sealing.

4. Series AH(R), the lining and impeller can be made of wear rubber or wear-resistant metal.

 

3. Type notation:

12/10ST-AH

12-------Suction diameter(inch)

10-------Discharge diameter(inch)

ST-------Frame type

AH------ Slurry pump type

 

4. AH pump Parameters:

Series AH

Inlet Diameter:1.5~20 inch(38 ~508mm)

Discharge Diameter:1~18 inch(25~460mm)

Flow Capacity:3.6~6480m³/h

Head:4~69m

 

Detailed advantage 

(1) CAD and Solidworks modern  designed ,  super  hydraulic  performance ,  high  efficiency and lower abrasion rate

(2 )Wide passage, non-clogging and good performance of NP

(3 Expeller seal combined with packing seal and mechanical seal have be adopted to guarantee the slurry from leakage

(4)Reliability design ensures long MTBF (mean time between events)

(5The meric bearing with oil lubrication , reasonable lubricating cooling systems ensure the bearing to be operated under the lo  w temperature

(6 )The material of wet parts have the good performance of anti-wearing  and  anticorrosion

(7 )The pump can be used for seawater ash-removing  to  prevent  it from  the  corrosion of seawater , salt and mist , and electrochemical corrosion

(8 )The pump can be operated in series with multi-stage  within  permissible  pressure.  The permissible maximum working pressure is 3.6 MPa.
 

Usage 
 

AH Series slurry pumps are used for delivering slurry with strong abrasion and high concentration for metallurgical, mining, coal, petroleum and chemical, transportation, river and channel dredging, building material and municipal projects, etc. 

Mainly manufacture: