U Type PTFE/Teflon Spring energized oil seal

Spring energized ptfe seal   The Spring energized seal is a sealing device consisting of a PTFE or other polymer, energized by a corrosion resistant metal spring.  When the seal is seated in the gland, the spring is under compression applying force on the gland sealing surfaces thereby creating a tight barrier to prevent gas or fluids from leaking.  The spring also provides resiliency to compensate for seal wear, gland misalignment or eccentricity.  While spring force provides adequate force for sealing at low pressure, at high pressure the system pressure augments the spring force to provide an even tighter seal.  The PTFE Spring energized seal are precision machined from PTFE, filled PTFE and other high performance polymers.           Good service --- worth your trust   Factory direct sale ----Customized service for you                                                                The different shape of spring seal/ spring energized seal 1.V-spring seals are designed for used in high or low presseure dynamic reciprocationg or rotary applications.   2.Helical Spring seals are designed for used in static or slow, infrequent dynamic sealing application due to high compression load over a small deflection range, which make these seals suitable when low pressure or vacuum and very low temperature ( cryogenic ) are present.   3.Slanted Coil Spring Seals are for low friction, dynamic reciprocating and rotary applications. The seal produces a near flat load curve when compressed ( installed ). They provide constant predictable loads through their very wide deflection range.   Energized PTFE Spring Seals:  

Type	Use for	Technical	Application	Material
Symmetric	standard heel groove	temperacture:-40~+260 °C ,speed ≤m/s:15,pressure≤ Mpa:45	virtually all fluids,chemicals and gases	PTFE-filled stainless steel
rod	standard heel groove	temperacture:-40~+260 °C ,speed ≤m/s:15,pressure≤ Mpa:45	virtually all fluids,chemicals and gases	PTFE-filled stainless steel
piston	standard heel groove	temperacture:-40~+260 °C ,speed ≤m/s:15,pressure≤ Mpa:45	virtually all fluids,chemicals and gases	PTFE-filled stainless steel
symetric for rod	flanged heel groove	temperacture:-40~+260 °C ,speed ≤m/s:2,pressure≤ Mpa:25	virtually all fluids,chemicals and gases	PTFE-filled stainless steel
high-low lip rod	flanged heel groove	temperacture:-40~+260 °C ,speed ≤m/s:2,pressure≤ Mpa:25	virtually all fluids,chemicals and gases	PTFE-filled stainless steel
inside	face seal	temperacture:-40~+260 °C ,speed:static or slow rotary,pressure≤ Mpa:45	virtually all fluids,chemicals and gases	PTFE-filled stainless steel
outside	face seal	temperacture:-40~+260 °C ,speed:static or slow rotary,pressure≤ Mpa:45	virtually all fluids,chemicals and gases	PTFE-filled stainless steel