NANO ArmaGel HT Aerogel Silica Aerogel insulation
- Payment Type:
- L/C, T/T, Paypal, Money Gram, Western Union
- Incoterm:
- FOB, CFR, CIF, EXW, FCA
- Min. Order:
- 50 Square Meter
- Min. Order:
- 50 Square Meter
- Delivery Time:
- 7 Days
- Transportation:
- Ocean, Land, Air
- Port:
- Tianjin, Shanghai
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|---|
| Productivity: | One high container per 10 days |
| Supply Ability: | One high container per 10 days |
| Payment Type: | L/C,T/T,Paypal,Money Gram,Western Union |
| Incoterm: | FOB,CFR,CIF,EXW,FCA |
| Certificate: | ASTM1728 |
| Transportation: | Ocean,Land,Air |
| Port: | Tianjin,Shanghai |
NANO ArmaGel HT Aerogel Silica Aerogel insulation
How The Aerogel Installation Guide for Pipeline
1) How to Choose Position of Axial Overlap Joint.
The position of axial overlap joint for each installed aerogel blanket segment shall be out of the part45°left or right to the pipe' s vertical center line.
2) How to Decide Blanket Length for a Pipe.
Cut aerogel blanket into suitable parts for the pipe's round surface. (1) For smaller pipes, the blanket length could be determined by wrapping the round surface with a narrow strip of aerogel blanket. The overlapping length of axial overlap seam is advised to be 30~50mm. (2) For larger pipes, tape measure or steel wire is recommended to determine the circumfe rence.CD When 6mm aerogel blanket is installed, an extra 8cm should be increased based on determined circumference.®When 10mm aerogel blanket is installed, an extra 10cm should be increased based on determined circumference.
3) Note for lnstallafon
The cut sale aerogel blanket shall be pressed tightly to the pipe's surface and the axial overlap seam shall be in a way that the upper part covers the lower part. Align both ends' edges of the blanket.
Aspen Silica Aerogel Insulation Fabric Used For Refineries Specification
Material:Nano Silica Aerogel
Color: White
Density: 180-220kg/m3
Applicable Temperature: -200 ~ +1000
Hydrophobicity: Absolute Hydrophobicity (Below 350)
Thermal Conductivity: 0.012 - 0.018w/mk (At 25)
Low Temperature Bending: 99%
Breaking Elongation: 65%
Bending Strength: 45KP
Compressive Strength: 32N
Aspen Silica Aerogel Insulation Fabric Used For Refineries Advantages
Lower total installed cost compared to traditional passive fire protections
Faster and easier application gives immediate passive fire protection-no curing or drying time needed
Aspen Silica Aerogel Insulation Fabric Used For Refineries Application
(1)Pipe insulation
(2) Equipment insulation
(3) Tank thermal insulation
(4) Vehicle insulation
(5) High-end building, roof and floor heating insulation
(6) Chemical, biological pharmaceuticals pipeline insulation
Aspen Silica Aerogel Insulation Fabric Used For Refineries Feature
It has the thermal insulation performance and surface hydrophobicity and excellent flame retardant properties.
Related Keywords
