Heat Resistant Industrial Rotary Machine Felt
- Payment Type:
- L/C, T/T, D/P, Paypal, Money Gram, Western Union
- Incoterm:
- FOB, CFR, CIF, EXW, FCA, CPT, CIP
- Min. Order:
- 5 Piece/Pieces
- Min. Order:
- 5 Piece/Pieces
- Delivery Time:
- 10-15 Days
- Transportation:
- Ocean, Land, Air
- Port:
- Tianjin, Qingdao, Shanghai
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|---|
| Productivity: | 500000Sqm/month |
| Supply Ability: | 500000Sqm/month |
| Payment Type: | L/C,T/T,D/P,Paypal,Money Gram,Western Union |
| Incoterm: | FOB,CFR,CIF,EXW,FCA,CPT,CIP |
| Certificate: | ISO |
| HS Code: | 5910000000 |
| Transportation: | Ocean,Land,Air |
| Port: | Tianjin,Qingdao,Shanghai |
Heat Resistant Industrial Rotary Machine Felt
Description:
We,Huatao Group,supply Heat Transfer Printing Felt ,used during Textile printing machine.Our main products are :Endless Printing Felt Belt,
Polyester Felt ,High temperature Printing Felt, Industrial Felt Products,
What is heat transfer printing?
A means of transferring a design to a substrate using an intermediate step. In heat transfer printing, a design is printed reversingly on a special release paper using a plastisol-based ink. The printed image is then placed against the desired substrate (commonly a fabric, such as a T-shirt) and subjected to high temperature (commonly 375ºF) and pressure (60 pounds) for a short period of time (12-15 seconds).
Our Transfer Printing Belt Specification:
|
Product name |
Heat Resistant Endless Printing Felt |
|
Material |
100% Nomex/ Mixed material |
|
Perimeter |
500-5000mm |
|
Width |
600-4000mm |
|
Thickness |
4-12mm |
|
Temperature |
200℃-300℃ |
|
We can customized products according your specification |
|
Heat Resistant Felt Belt Nomex Felt Advantage
1. Specially added seamless base fabric, the base fabric is endless industrial silk. Testing report showed the misaligned rate is about ±3mm. - will avoid misaligned problem.
2. The base fabric can control the shrinkage rate in 2.5%--3%. - will avoid the belt not suitable for the machine.
3. 100% DUPONT Nomex - improve working life and end product quality.
Appliacation:
Our Transfer Printing Blanket can use in those brand: Klieverik, Monti, Transmatic, Lemaire, Practix, Sorim, Studio FX, Stork, Bates, Wuppertal, Kristall, Sublistatic, Gessner, Bizmak, S.T.M., Singer, KMT, MOGK, TURAL MAKINA...
Nomex Transfer Felt Detail Image
Transfer Printing Blanket Packing details
Waterproof film + bubble film + woven bag + kraft paper(or as your demands)
FAQ:
When you use our pasting belt during your production,you could refer to the following solution if you have following problems:
1.The belt was scratched when the machine was running.-- please check if there is any debris in the belt or in the lead paste. (please make sure that there is no debris on the tape.)
2.The belt slippage when the machine was running,
-- please make sure that the tape is fully wet with warm water before the machine and properly adjust the elastic shaft.
3.When the machine is running, the tape is stuck.-- kindly make sure the belt thickness is suitable for your machine, and proper adjustment of the scraper height can alleviate the problem.
4.The belt is too hard to get on machine.
--- steam it for about 5 minutes.Once you have other problem, kindly contact us to give you the solutions.
Related Keywords
