high rise steel structure building

Specifications high rise steel structure building

1, Easy to install

2, attractive apprance

3, low cost

 high rise steel structure building Some information about the products .   1.       Vertical Support #1:  For each 6-Car Carport, there are three vertical support posts  (standing between car #1/car #2,  car #3/car #4, and car #5/car #6) Main Vertical Beam is rectangular HSS steel tubing, 18 feet 4 inches long, 8 inches x 4 inches, .250 inch thick steel 2 Diagonal Support Beams are square HSS steel tubing,  4 inches by 4 inches, .125 inches thick, mounted to the vertical support   2.       Roof Support #2:  For each 6-Car Carport, we need 6 Roof Support Beams. Rectangular HSS steel tubing 10 feet long, 6 inches by 4 inches, .125 inches thick .25 inch thick Steel Foot plates (Cleats) welded to each end, with L-Shaped Cleat support welded to middle to bolt to C-Purlin 6 holes need to be drilled in each Cleat   3.       C-Shaped Purlin #3:  (Can be lipped or plain – see attached file Perlin.jpg)   For each 6-car Carport, we need 12 pieces of Purlin CEE Steel 27 feet long, 8 inches by 2.5 inches, 12 GA (.125 inches thick) No Holes need to be drilled into these pieces.   4.       Roof Panels:   these panels come standard in 3 feet 2 inches wide by 10 feet long in corrugated steel 26 Gauge  1 and ¼ inch R-Panel. These sections have a 2 inch overlap, so to cover 54 feet we need on both sides, we need 36 pieces. If you can make these pieces 6 feet wide and do less pieces, that is fine.  Whatever is best.   5.       Ridge Cap:  Steel 6 inches wide V-shaped 27 feet long, 2 pieces to span 54 feet.