Horizontal Froth Slurry Pump

Get Latest Price

Payment Type:: T/T, Western Union

Incoterm:: FOB, CFR, CIF, FCA

Min. Order:: 1 Set/Sets

Min. Order:: 1 Set/Sets

Delivery Time:: 7 Days

Transportation:: Ocean, Land, Air

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Place of Origin:	China
Productivity:	100 Sets per Month
Supply Ability:	100 Sets per Month
Payment Type:	T/T,Western Union
Incoterm:	FOB,CFR,CIF,FCA
Certificate:	ISO
Transportation:	Ocean,Land,Air

Product Description

Horizontal Froth Slurry Pump

Overview:

A large oversized inlet with a unique impeller inducer blade handles heavy froth and higher viscosity dense slurries with ease. The War-man equivalent AHF line of horizontal froth pumps has proven valuable for very dense slurries where viscosity starts to become a pumping issue for the standard slurry pump.

Key features/benefits

Heavy duty construction with through-bolt design provides ease of maintenance and less down time

Ductile iron fully lined casing provides durability, strength and long service life

Large diameter, slow turning, high efficiency impellers maximize wear life and lower TOC

Large, open internal passages reduce internal velocities maximizing wear life resulting in lower operating costs

Unique impeller design for most difficult froth applications

Thick elastomer or metal bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and intermixability to reduce over all maintenance costs and maximize wear life

Minimal shaft/impeller overhang reduces shaft deflection and increases packing life

Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life

Standard AH can be converted by replacing cover plate, throat bush and impeller

Full flush, low flow or dry running centrifugal seals minimize water usage and operating costs

Specifications:

Model 4E-AHF

Discharge4 4-inch (100mm)

Capacity 72-432m3/h

TDH 10-60m

Rated Motor Power 120Kw

Speed 500-1600r/min

Max. Efficiency 68%

A brief introduction of the slurry pumps we offer:

Slurry Pump Series:

1. Metal Lined Slurry Pump, SH Type; 2. Rubber Lined Slurry Pump (SHR Type); 3. Hi-Pressure Slurry Pump (SBH Type);

Gravel Pump Series:

1. Hard Metal Sand Pump (SG, SHG Type); 2. WN Dredging Pump (WN Type);

Sump Pump Series:

1. Metal Vertical Slurry Pump (SV Type); 2. Rubber Vertical Slurry Pump (SVR Type);

Local Pump Series:

1. Power Plant Slurry Pump (ZBG Type); 2. Coal Washing Slurry Pump (ZJ Type);

Froth Pump Series

Standard Material of Wet-end Parts: Hi-Chrome Alloy A05

A05 Chemical Components:

Material Chemical Requirements, Weight %

Designation Material Name C Mn Si Ni Cr Mo Cu P V S Description Hardness

A03 Ni-Hard 1 3.0-3.6 0.3-0.7 0.3-0.5 3.3-4.8 1.5-2.6 0-0.4 ... ≤0.3
≤0.15

A05 Ultrachrome 2.92 0.98 0.54 0.8 26~28 ≤0.8 ... 0.062 .. 0.051 27% Cr Erosion Resistant White Iron 58-62HRC

A06 NI-Hard 4 3.2 0.2 1.5 4 8 0.5 ... 0.15 ... 0.12 Martensitic White Iron 62-67HRC

A07 15/3 Chrome/Moly Iron 2.8-3.2 0.5-1.2 0.8-1.0 ... 15-17 2.8-3.2 0.8-1.2 ... ... ... Chromium/Molybdenum 58-62HRC

A33
1.55 1.2 1.29 1.89 36.7 1.92 1.31 ... ... ... Corrosion-resistant Chrome

A49 Ultrachrome 1.57 0.71 1.36 2.01 28 1.96 1.32 0.038 ... 0.027 28% Cr, Low C, White Iron

A61 Hyperchrome 4.4-4.6 2.0-2.5 0.3-0.8 ... 30-32 2.5-3.0 ... ... 0.2-0.3 ... Hypereutectic white iron

R55 Standard Natural Rubber

Natural Rubber for erosive applications 65 Shore

U01 Wear Resistant Polyurethane

Polyurethane Elastomer 78 Shore

Suitable Applications: 1. A05/A07 is suitable for heavy duty slurry with high abrasion with pH ranges 5-14.
2. A33 is suitable for acidic applications where pH ranges from 1-3.
3. A49 is for slurry both abrasive and corrosive, esp. for application where the slurry contains chloride.
4. R55 is for corrosive applications where slurry pH ranges from 2-4.

Remarks: 1. The above different kinds of material are for for pump wet-end parts, i.e: impeller, volute liner, throatbush, frame plate liner insert, cover plate liner, frame plate liner.
2. We also have C21, C23, and they are for parts like: shaft, shaft sleeve, shaft spacer, gland assembly etc.
3. For shaft sleeves, J04, J05 and J21 are also avaiable.
4. Pump bodies (cover plate and frame plate) and pump base, bearing housing can be made of G01-grey iron, D21-ductile iron.

Performance Curve:

Typical Applications:

Tailings

Heavy Mining

Ash Handling

Cyclone Feeds

Pulp and Paper

Abrasive Slurries

Coal Preparation

Mineral Processing

Aggregate Processing

Heavy Refusal Removal

Projects with SME SH Slurry Pump:

Sectional Drawing:

Send your message to this supplier

* From:
* To:

Ms. Serena
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords

Warman AHF Froth Pumps , Horizontal Froth Pumps , Weir Froth Slurry Pumps

Model	4E-AHF
Discharge4	4-inch (100mm)
Capacity	72-432m3/h
TDH	10-60m
Rated Motor Power	120Kw
Speed	500-1600r/min
Max. Efficiency	68%

Material Chemical Requirements, Weight %
Designation	Material Name	C	Mn	Si	Ni	Cr	Mo	Cu	P	V	S	Description	Hardness
A03	Ni-Hard 1	3.0-3.6	0.3-0.7	0.3-0.5	3.3-4.8	1.5-2.6	0-0.4	...	≤0.3		≤0.15
A05	Ultrachrome	2.92	0.98	0.54	0.8	26~28	≤0.8	...	0.062	..	0.051	27% Cr Erosion Resistant White Iron	58-62HRC
A06	NI-Hard 4	3.2	0.2	1.5	4	8	0.5	...	0.15	...	0.12	Martensitic White Iron	62-67HRC
A07	15/3 Chrome/Moly Iron	2.8-3.2	0.5-1.2	0.8-1.0	...	15-17	2.8-3.2	0.8-1.2	...	...	...	Chromium/Molybdenum	58-62HRC
A33		1.55	1.2	1.29	1.89	36.7	1.92	1.31	...	...	...	Corrosion-resistant Chrome
A49	Ultrachrome	1.57	0.71	1.36	2.01	28	1.96	1.32	0.038	...	0.027	28% Cr, Low C, White Iron
A61	Hyperchrome	4.4-4.6	2.0-2.5	0.3-0.8	...	30-32	2.5-3.0	...	...	0.2-0.3	...	Hypereutectic white iron
R55	Standard Natural Rubber											Natural Rubber for erosive applications	65 Shore
U01	Wear Resistant Polyurethane											Polyurethane Elastomer	78 Shore



Suitable Applications: 1. A05/A07 is suitable for heavy duty slurry with high abrasion with pH ranges 5-14. 2. A33 is suitable for acidic applications where pH ranges from 1-3. 3. A49 is for slurry both abrasive and corrosive, esp. for application where the slurry contains chloride. 4. R55 is for corrosive applications where slurry pH ranges from 2-4.
Remarks: 1. The above different kinds of material are for for pump wet-end parts, i.e: impeller, volute liner, throatbush, frame plate liner insert, cover plate liner, frame plate liner. 2. We also have C21, C23, and they are for parts like: shaft, shaft sleeve, shaft spacer, gland assembly etc. 3. For shaft sleeves, J04, J05 and J21 are also avaiable. 4. Pump bodies (cover plate and frame plate) and pump base, bearing housing can be made of G01-grey iron, D21-ductile iron.