ADSS preformed dead end assembly

Specifications ADSS preformed dead end assembly,dead end assembly

Al.clad steel

grip strength 95%RTS

Clamp strength: 30kN

ISO 9001:2008

ADSS preformed dead end assembly,dead end assembly
Composition: twisted wire, thimble, PH-type shackle, U-type shackle etc.
Purposes: support all strain, make ADSS cable connect the strain pole and tower.
Features: a. preformed wire connect the pole and tower by thimbles etc. link fitting, afford the load of the transmission line.
b. grip strength not less than cable 95%RTS in case that not more than lateral pressure of the cable
c. excellent aluminum clad steel improve the mechanical and resist-corrosion function, extend life.
Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods.
Order Information: a. It is suitable for grip strength not more than 15KN on 10KV distribution line .simple structure, easily installation and low cost.
b. Choose the suitable DN tension clamp according to the outer diameter, span, rated tension strength of ADSS cable etc.
c. the quantity configuration: 1 set / line pole tower,2 sets/strain pole tower d. Clamp strength: 30kN.
ADSS with the DN-type pre-twist-type Clamp Specifications Model Parameter table:

Model	Clamp grip(kN)	For span(m)	Length of twisted wire(mm)	Clamp quality(kg)
ADN-10-**	10	≤100	1100	1.6
ADN-13-**	13	101-150	1300	1.9
ADN-15-**	15	151-200	1500	2.1

Note :**-- on behalf of Cable diameter (mm)   Drawing: Product: Component:   Packing:   Delivery:   Construction site:   ISO: