OPGW accessories suspension assembly
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
| Place of Origin: | Hebei, China (Mainland) |
|---|
Product Description
Product Description
Specifications OPGW accessories suspension assembly,suspension assembly
Al.alloy rods
double layer
70,100,120KN
ISO 9001:2008
OPGW accessories suspension assembly,suspension assembly Product Description Composition: inner twisted wire,Outer twisted wire,Rubber block and cast aluminum shell. Uses: To play a supportive role, the optical fiber composite overhead ground wire (OPGW) are hung on a straight line on the tower. Features: a Suspension and OPGW cable has a larger contact area, stress distribution uniform, no stress concentration points, play better on cable protection, at the same time enhancing the stiffness of cables at hanging point location. b There is a good dynamic stress capacity, can provide sufficient grip strength (14 ~ 18% RTS) in order to maintain OPGW cables in the long run under the conditions of unbalanced load for safe operation. c. Suspension of overhanging angle to meet the 15 ° ~ 18 ° d. The structure coupled with flexible rubber clip block, enhanced self-damping to reduce abrasion. e. rounded end processing, increased corona voltage. f. high-quality aluminum alloy material to enhance the mechanical properties of the clamp and corrosion resistance, significantly extended service life. Technical requirements: meet the DL / T 766-2003 optical fiber composite overhead ground wire (OPGW) with the preformed helical fittings technical requirements and test methods. Order Notes: a. According to the diameter of OPGW cable parameters such as selection of suitable Suspension.
b. the number of configurations as follows: 1 set / line tower.
c. The lay direction of inner twisted wire is opposite with lay direction of the outer twist wire, the standard configuration: Lay direction for OPGW outer twisted wire is right, If left, it should be specified in the order contract.
d. According the mount point on the tower, select the appropriate link fittings (such as the U-screws, U-type hanging ring, UB clevis etc.).
e. Clamp Strength is divided into 70kN, 100kN , 120KN and so on. OPGW preformed helical suspension clamp parameter table:
Note :**-- on behalf of Cable diameter (mm) Packaging & Shipping 
Our Services 
Company Information Shijiazhuang Huaneng Electric Power Fitting Co. Ltd. is a new company with abilities of R&D,manufacture and trade. The company locates in No.189, Hengshan Street, Shijiazhuang High-tech Development Zone, Hebei Province, China, covering the area 26,593 square meters. Shijiazhuang Huaneng Electric Power Fitting Co. Ltd. specially manufactures preformed helical fittings which are widely used in transmission line. Currently our company owns the big ability to produce lots of varied preformed helical fitting in one year, among them OPGW and ADSS fittings for optical cables,together with fittings for conductor line and earth-wire line which is developed recently passed the tests in the national Electric Power Construction Research Institute and Shanghai Electric Cable Research Institute, and passed identification of the expert group of Hebei Economic and Trade committee. Our company was named as a high-tech enterprise by Hebei Science and Technique Bureau . From the beginning of establishment, we pay more attention to the quality of products, strengthened the quality conception of employees, and build up a perfect quality-control system, so we have passed the qualification of ISO 9001:2008 international quality system identification. In our company there are enough experts and advanced equipments for production and examinations, Our products have been sold to many localities in nation and overseas, and been used in lines of different voltage degree. Suffering the rigorous test in every kind of weather conditional, our products still work very well without any trouble occurrence. In order to offer the customer a exact and effective plan of reduce-vibration , Our company established a vibration-laboratory with the help of transmission line experts and the vibrate experts of the national power company. We can test the power characteristic and tired function of vibration damper, and test it’s reduce-vibration valuation in the the OPGW and ADSS optical cables, consequently providing a scientific trial basis for design of reduce-vibration in the projects. Our quality guideline: Regarding customer as our focus with attention, persisting in innovating in techniques, strengthening and perfecting quality-control system, providing the high-tech product for electric power developments. 
Al.alloy rods
double layer
70,100,120KN
ISO 9001:2008
OPGW accessories suspension assembly,suspension assembly Product Description Composition: inner twisted wire,Outer twisted wire,Rubber block and cast aluminum shell. Uses: To play a supportive role, the optical fiber composite overhead ground wire (OPGW) are hung on a straight line on the tower. Features: a Suspension and OPGW cable has a larger contact area, stress distribution uniform, no stress concentration points, play better on cable protection, at the same time enhancing the stiffness of cables at hanging point location. b There is a good dynamic stress capacity, can provide sufficient grip strength (14 ~ 18% RTS) in order to maintain OPGW cables in the long run under the conditions of unbalanced load for safe operation. c. Suspension of overhanging angle to meet the 15 ° ~ 18 ° d. The structure coupled with flexible rubber clip block, enhanced self-damping to reduce abrasion. e. rounded end processing, increased corona voltage. f. high-quality aluminum alloy material to enhance the mechanical properties of the clamp and corrosion resistance, significantly extended service life. Technical requirements: meet the DL / T 766-2003 optical fiber composite overhead ground wire (OPGW) with the preformed helical fittings technical requirements and test methods. Order Notes: a. According to the diameter of OPGW cable parameters such as selection of suitable Suspension.
b. the number of configurations as follows: 1 set / line tower.
c. The lay direction of inner twisted wire is opposite with lay direction of the outer twist wire, the standard configuration: Lay direction for OPGW outer twisted wire is right, If left, it should be specified in the order contract.
d. According the mount point on the tower, select the appropriate link fittings (such as the U-screws, U-type hanging ring, UB clevis etc.).
e. Clamp Strength is divided into 70kN, 100kN , 120KN and so on. OPGW preformed helical suspension clamp parameter table:
Model | For cable diameter(mm) | Pre-twisted wire length of the inner (mm) | Pre-twisted wire length of the outer(mm) | Clamp quality(kg) |
OXC-** | 7.8-9.7 | 1600 | 1000 | 4.12 |
OXC-** | 9.8-11.5 | 1800 | 1200 | 4.26 |
OXC-** | 11.6-14.1 | 2000 | 1400 | 4.76 |
OXC-** | 14.2-16.1 | 2200 | 1600 | 5.57 |
OXC-** | 16.2-20.0 | 2600 | 2000 | 7.62 |
Our Services Company Information Shijiazhuang Huaneng Electric Power Fitting Co. Ltd. is a new company with abilities of R&D,manufacture and trade. The company locates in No.189, Hengshan Street, Shijiazhuang High-tech Development Zone, Hebei Province, China, covering the area 26,593 square meters. Shijiazhuang Huaneng Electric Power Fitting Co. Ltd. specially manufactures preformed helical fittings which are widely used in transmission line. Currently our company owns the big ability to produce lots of varied preformed helical fitting in one year, among them OPGW and ADSS fittings for optical cables,together with fittings for conductor line and earth-wire line which is developed recently passed the tests in the national Electric Power Construction Research Institute and Shanghai Electric Cable Research Institute, and passed identification of the expert group of Hebei Economic and Trade committee. Our company was named as a high-tech enterprise by Hebei Science and Technique Bureau . From the beginning of establishment, we pay more attention to the quality of products, strengthened the quality conception of employees, and build up a perfect quality-control system, so we have passed the qualification of ISO 9001:2008 international quality system identification. In our company there are enough experts and advanced equipments for production and examinations, Our products have been sold to many localities in nation and overseas, and been used in lines of different voltage degree. Suffering the rigorous test in every kind of weather conditional, our products still work very well without any trouble occurrence. In order to offer the customer a exact and effective plan of reduce-vibration , Our company established a vibration-laboratory with the help of transmission line experts and the vibrate experts of the national power company. We can test the power characteristic and tired function of vibration damper, and test it’s reduce-vibration valuation in the the OPGW and ADSS optical cables, consequently providing a scientific trial basis for design of reduce-vibration in the projects. Our quality guideline: Regarding customer as our focus with attention, persisting in innovating in techniques, strengthening and perfecting quality-control system, providing the high-tech product for electric power developments. 
You May Also Like
You May Also Like
