Waterproof,LED chrismas light,LED string light 10M 100LED

Specifications led christmas light

1.easy to install

2.indoor and outdoor use

3.Safe,reliable,waterproof

4.warranty: 2 years.

led christmas shower light      Assembly Information: 1. Solder connection should only be performed on designated solder pads (marked “ +/-”). During soldering, don’t exceed the maximum soldering time of 10 seconds and the maximum soldering temperature of 260 celsius degrees. 2. The smallest unit (3 LEDs) can be removed by cutting with scissors between the designated solder pads. 3 .The mounting of the strip is facilitated by means of the double-sided adhesive on the back-surface of the strip. Care must be taken to provide a clean and dry mounting surface, free of oils or silicone coatings as well as dirt partied. The mounting substrate must have sufficient structural integrity. Take care to completely remove the adhesive backing. Once the strip is appropriately positioned, press on the strip with about 20N/cm2 (refer to application techniques of 3M adhesive transfer tapes). 4. The minimum bending radius is 2 cm. The strip may be bent over a smaller radius of the circuit board containing no electronic components and such bends should be made once and fixed in position to avoid cyclic fatigue.

nput Voltage	DC 12V-24V
Input power	1-3W
Lamp Quality	96PCS
Beam angle	360degrees
color temperature	Ø26x600mm
Material	PC
Ambient temperature	-30°C to+50°C
Humidity	10%-90%
light decline	<3‰/1kh
lifetime	>30000H
certificate	CE/RoHS(Driver certificate according to customer's requirement)
IP rating	IP67
emitting color	W/G/B/Y/R
Connecting cable color	black/grey/white
tube type	double array DIP LEDS