Custom all kinds of electromagnetic pump

                  Barrel type electromagnetic pump is established on the principle of linear motor, the structure of it is specific. The coil winding pass to different phase of the change of electric current, when two phase inversion, the magnetic field will move to the opposite direction, by adjusting the intensity of magnetic field to control the fluid velocity. The coil structure mainly is three-phase multi-layer coil structure and single solenoid structure. The cascading around more makes high power efficiency. Winding adopts forced water cooling way, including with insulating ring stainless steel water flange, stay and good insulation, this structure shall ensure that the axial pressure. Electromagnetic pump winding has six circuits, through the two main water system provide pump body in and out of the water. The inlet pipe has six nodes, the outlet pipe has six nodes. Each loop has cooling protection, when the temperature reaches 75 °C, each of the water loop by the movements of the overheat switch for overheating protection, after the cooling water temperature lower half will automatically restored.  
                    System composition                  Electromagnetic pump body               The isolated transformer(tapped transformer)               Control cabinet               Compensation ark               Cooling system (By lord cold and vice cold composition)               Pump ditch                        Aluminium electromagnetic pump is based on the principle of linear motor. When the pump body work by special coil structure in the traveling wave magnetic field generated inside, magnetic field and the internal melting liquid interact to produce magnetic thrust, electromagnetic thrust high temperature melting furnace will take high speed to the circular liquid material well inner cavity, and on the material in high speed whirlpool well formed, whirlpool will be broken material involved, through the back into the melting pot bottom tube. Change the power supply voltage and current phase, can change the size of the electromagnetic thrust and direction.                                    Electromagnetic pump’s application area             Aluminium scrap recycling             Quantitative casting             Mixing             The application of metal purification pickling process             High temperature metal transfer             Transmission of heavy meta                   Electromagnetic pump principle             Electromagnetic pump is the use of magnetic field and current in the conductive fluid interaction, make the fluid by the electromagnetic force and pressure gradient, a device to push the fluid motion. Mostly used for pumping liquid metal in the practical, so is also called the liquid metal electromagnetic pump. The role of electromagnetic pump is in the closed pipeline system to transmission of liquid metal, or other conductible liquid. In this sense, electromagnetic pump is familiar with rotating impeller drive equipment, the difference is the force generated in a different way. Drivers can use the right hand rule, when current flows through a conductor, will produce an induced magnetic field with metal solution produce induced current, induced current and magnetic field produce electromagnetic force, The force is the motive force of the molten metal movement, this force is not generated by mechanical components, and the metal solution not contact is the most important feature of electromagnetic pump.                Electromagnetic pump no mechanical moving parts, simple structure, good sealing, reliable running and don't need a shaft seal, therefore in the chemical industry, printing industry, used for conveying some toxic heavy metals, such as mercury, lead, etc. Used in nuclear power and nuclear fusion device transmit the molten nonferrous metals (sodium or potassium, sodium, potassium alloys, lithium lead), more widely used in metallurgy transport molten nonferrous metal casting production. The flow rate can reach 13000 m/h, the Pressure can reach 1.5 MPa, temperature is 1200 °C.