All kinds of electromagnetic stirrer from IDEA

                 In the primary aluminum used in the production process of electromagnetic stirring technology ,the most main purpose is to make the aluminum alloy melt liquid components uniform, and on the waste recycling technology’s main purpose is to improve the melting effect, to reduce the loss and increase casting yield. Of course, since the noise components of the waste aluminum was more complex, long time mixing for composition adjustment and composition of the improved uniformity is particularly important. We shall, according to the different purpose reasonable setting of electromagnetic stirring device installation position sensors, either party furnace, the furnace, single room or a double room furnace, the installation of sensors can be roughly divided into bottom buy and side for two kind of way, buy the installation is mainly used for the new furnace form or depth of molten pool in the production process change the big furnace, this form melting liquid depth change effects and can achieve good mixing effect, in waste recycling aluminum furnace installation position to deviation furnace center, so can form the whole furnace big, help to fast melting scrap aluminum. Sensors installed side is mainly used for old furnace way transformation and molten pool depth in the production process change less than 200 mm.                        Effect of stirring             To adopt the advanced technology of electromagnetic stirring, through lots of experiments and industrial production at home and abroad by using electromagnetic stirring main effect achieved: Reducing slag content;             Reduce the center shrinkage cavity;             Eliminate the macrosegregation;             Increase the equiaxial crystal ratio;             Improve solidification organization, etc.               The advantages of electromagnetic stirring                 Our company is professional producing the 2-150 tons of various kinds of specifications with aluminum melting pot electromagnetic stirring device, is the non-ferrous metal industry electromagnetic products professional manufacturers and suppliers, the product series: furnace bottom inductive electromagnetic stirring device, lateral inductive electromagnetic stirring device, renewable aluminum industry with double room furnace electromagnetic blender, etc. Electromagnetic stirring technology application can be obtained as follows effect:                 1. Can make the melt alloy components uniform. General electromagnetic stirring device (no more than 20 minutes), can the whole furnace of various elements of the aluminium chemical composition of the relative deviation is less than 5%, can satisfy the almost all alloy to composition uniformity of the requirements.                 2. The mixing process not destroy the oxidation layer, can reduce the melt hydrogen absorbing and oxygen, ensure the quality of the melt, and reduce the loss (relative value) 20 to 25%.                3. Can make the top and bottom of the melt temperature uniformity. General mixing ten minutes to the limit of the melt temperature can drop to less than 5 °C. So can reduce melting temperature, can improve the melt bottom alloying melting degree, in lower melting again at the same time can reduce the degree of damage.               4. In the process of aluminum ingots re-melting using electromagnetic stirring technology can shorten the time of smelting, improve work efficiency, reduce energy consumption, according to data provided by the already, can reduce energy consumption (improve efficiency) 20 to 30%.               5. No pollution aluminum melting liquid. This has the important meaning for high purity aluminium and the iron control strict alloy.               6. Can reduce the labor intensity, and improve working con                     Compared with other mixing way, electromagnetic stirring compatible with the other mixing way’ advantages, and has its own unique characteristic, therefore, electromagnetic stirring has become the common use stirring method.