pvc fill for cooling tower, pvc filler

Cooling Tower Fill Feature 

1. The filling has larger specific surface-area after several technological improvement, this prolongsdetention time of

drip on filling surface, make heat interchange of water and air more adequate, it is proved by testing that: Comparing

to fillings which are applied widely in the market, on the precondition of comparative thermal performance, the

airflow resistance of this kind of filling diminishes 8~20%

2. Cooling Tower fill has the good characteristic of hydrophilicity, proof-oil, high-temperature-resistant, it doesn't occur geometric alteration under condition of 65°C, and it won't crash and crack under condition

of -40°C. Its anti-flaming oxygen index is more than 40.

According to practically experience of similary project, the filling is bound by special adhesive, ratio of bonding is no less than 95%, intensity of flat crushing ≥3000 N/m2, shear intensity after being bound for 24 hours is more than 3.3Mpa.

3. Cooling Tower fill has the good characteristic of hydrophilicity, proof-oil, high-temperature- resistant,anti-ageing.

The strength of filling block is more than 300Kg/m2.

Cooling Tower Fill Characters 

1. Acid proof.

2. Alkali-resisting.

3. Anticorrosion for the organic solvent.

4. Good performance of inflaming retarding.

5. Increasing cross-sectional area.

6. Add water retention time.