Cotton Battery Pasting Belt with Water Absorbing Quality

Cotton Type Battery Pasting Belt with Water Absorbing Quality

Brief Introduction

Our Endless Pasting Belt is based on the traditional process and the import process,it is produced according to the Battery Plate Pasting Machine`s production requirements and once formed. The working life is twice as long as the traditional belt in China, The error of the coated plate is even. Our Battery Pasting Belt with strong water absorption, easy to remove ointment, not elongation (using tensile skeleton), no static electricity, cost-effective. When replacing the Pasting Belt, there is no requirement for any direction, and it can be normally used after being on the machine.

Seamless Pasting Belt Details

Product Name ----------------------- Endless Pasting Belt For Battery Production
Color --------------------------------- White
Material ------------------------------100% Nylon
Application -------------------------- Energy storage battery plate paste
Available size ------------------------ As your demands
Applied environment ---------------- Wear resistance, corrosion resistance, slip resistance, acid-proof, alkali resistance

Advantage of our Synthetic Pasting Belt

• "Non woven" structure

• Constant thickness 

• Top and bottom of the belt with equal surface  

• Longer duration of the belt

• Surface with high abrasion resistance

• Truly endless surface, with the same strength in all the belt`s sections and no weak points

Application of our Battery Grid Pasting Conveyor Belt

This kind of Battery Pasting Belt is mainly used various of Pasting Machine, such as MAC,Golden Sunlight, etc. We could produce the specific size as your demands. We make sure that the belt we made will be suitable for your Battery Plate Pasting Machine. The application show of the pasting belt for your reference:

Daily maintenance and instructions

1. It should be used within four months after received

2. It should be stored in a low-temperature dry environment,to avoid direct sunlight

3. It should be check if there have any sundries on the both side of the belt,in order to avoid scratching the belts

4. It should be as wet as possible when use the belt

5. It should be washed with a clean surface after half-working day

Note:on the basis of the working life,good maintenance can increase the working life