Center Pivot and Lateral Move Systems Irrigation

The machine moves in a circular pattern and is fed with water from the pivot point at the center of the circle. This system makes it possible to irrigate large surfaces with low installation and maintained costs.

the key parts for holding the total weight of pivot like the bridge sling. The way of processing is very important because if the process is not correct, the truss rods would be broken when the pivots is working and cause the falling down of the complete machines.

We use high frequency electric heating system to heat the end of the steel rods and use head punching machine to punch both end of the steel rods.

When the rod being cut as the picture below, you can find that the steel rod and the headed part are exactly the same molecular.The quality standard is that this truss rod can stand 60,000psi yield strength.We use 22mm diameter rods instead of 19mm to make it stronger than American manufactures.

Detailed Specification:

1. The working environment

1) Irrigation district widen, linked pieces of conserved lands

2) Land Intensive Operations

3) A single crop

4) Electric power

2. Water source:  

the sufficient and stable supply of deep well water.

water quality need to conform to GB 5084.

When there is impurities in the water, it should take sedimentation or filtration measures.

3. Terrain:

Surface slope of land can not greater than 15%.

4. Soil condition:

It is suitable for all types soil

5. Wind Speed:

When the wind speed is greater than 5.4m / s, irrigation system is not suitable for working.

6. Crop:

It is suitable for spraying irrigated upland crops and pasture

Product photo