Slurry pump WAD series compatible M L pumps

Slurry pump WAD series compatible with the world famous pumps

CAD modern design, super hydraulic performance, and lower abrasion rate;
High efficiency: up to 81%
High head: up to 100 m
Wide passage, non-clogging and good performance of NPSH;
Expeller seal combined with packing seal and mechanical seal have been adopted to guarantee the slurry from leakage;
Reliability design ensures long MTBF (mean time between events);
Adopting metric bearing with oil lubrication, reasonable lubrication and cooling systems to ensure the bearing to run on the status of low temperature;
The wet parts are made of special material which has good performance of abrasion-resistant and corrosive resistant;
The pumps can be used for seawater ash-removing to prevent it from the corrosion of seawater, salt and mist, and electrochemical corrsion;
The pumps can be installed in series with multi-stage within allowable pressure.

Alumina,Copper mining,Iron ore,Gas oil,Coal ,Electric industry,Phosphate,Bauxite,Gold,Potash,
Wolfram,Water sewerage utilities,Sugar,Tobacco,Chemical fertilizer.  

Main Features

A large percentage of duties allow the use of the ce ntrifugal seal which eliminates the need of sealing water.
Gland shaft seal
A packed gland type shaft seal is also available and can be fitted with a low flow or a full flow flush seal water arrangement.
Shaft and bearing assembly
A large diameter shaft with a short overhang minimizes deflection and vibration.Heavy-duty roller bearings are housed in a removable bearing cartridge.
Pump Base
A minimum number if through bolts hold the pump casing to the frame .A means of impeller adjustment is provided in a convenient position below the bearing housing.
Outer Casing

Split outer casing halves of cast or ductile iron contain the wear liners and provide high operation pressure capabilities.
Impeller
The impeller may be either moulded elastomer or hard metal.Deep side sealing vanes relieve seal pressure and minimize recirculation.

Cast-in impeller threads are better suited for slurries.
Interchangeable hard metal and moulded elastomer liners.
Mating faces in hard metal liners are tapered to allow positive alignment during assembly and allow components to be easily removed for replacement.
Hydraulic seal rings give positive sealing between mating faces.

Completely the same with the world famous pumps .
The spare parts could completely interchangeable with the world famous pumps,such as the impeller,cover plate,pump casing,front liner,

back liner,shaft, bearing assembly ,labyrinth ring etc 

Technical

Three-dimensional diagram.

Damei Kingmech Pump with a professional technical engineer,we have a completed three -dimensional system

Our Service

Pre-Sales Service

* Inquiry and consulting support. 

* Sample testing support. 

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine. 

* Engineers available to service machinery overseas.