2/1.5B-AH polyurethane pump parts

$123.00

≥1 Piece/Pieces

Min. Order:: 1 Set/Sets

Min. Order:: 1 Set/Sets

Transportation:: Ocean, Land, Air, Express, Express

Port:: Tianjin, Qingdao, Guangzhou

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Place of Origin:	CHINA
Productivity:	200sets per month
Supply Ability:	200Sets per month
Payment Type:	L/C,T/T,Paypal,Money Gram,Western Union
Incoterm:	FOB,CFR,CIF,EXW,FAS,FCA,CPT,CIP,Express Delivery
Certificate:	ISO , CE
HS Code:	8413709990
Transportation:	Ocean,Land,Air,Express,Express
Port:	Tianjin,Qingdao,Guangzhou

Product Description

2/1.5B-AH Polyurethane Pump Parts

Polyurethane (also named PU) is an unique material that has the elasticity of rubber combined with the toughness and durability of metal. It permits the engineer to replace rubber, plastic and metal with the ultimate in abrasion resistance and physical properties. Polyurethane can reduce plant maintenance.
Polyurethane slurry pump impeller (PUR and PU) is made by Polyurethane which is a polymer composed of a chain of organic units joined by urethane links. This impeller have better performance than natural rubber impeller for the slurry transportation.
Besides,we also have Polyurethane Cover Plate Liner,Frame Plate Liner,Throat Bush,Frame Plate Liner Insert etc.

polyurethane pump parts

Materials	NBR,Viton/FKM,Siicone/VMQ,EPDM,FFKM,HNBR,PU,CR,FVMQ,PTFE
Temperature	NBR(-40~120°C),CR(-40~120°C) Viton(-20~200°C),Silicone (-70~220°C) EPDM(-50~150°C),PU(-40~90°C)
Applied industry:	extensively used in chemical industry, petroleum industry, medical technique, food industry, sewage-disposal industry, steel industry, semi-conduct industry and so on.
Main advantage:	1) excellent anti-chemical character. It almost applies to all mediums.
	2) temperature range is very wide.
	3) anti oil function is very good.
	4) long service life.
Operation conditions	Pressure:<50MPa
	Temperature:-20°C ~ 220°C

Construction Drawing:

Characteristics

The abrasion and tear resistance of Urethanes are much better than rubbers, while having higher load bearing capacity. Compared to plastics, urethanes have superior impact resistance, while having excellent wear properties and elastic memory. Besides, PU is more advance in weight reduction, noise abatement and wear resistance than metal parts.
However,Urethanes are unsuitable for temperatures exceeding 70ºC and for concentrated acids and alkalies,ketone,esters,chlorinated and nitro hydrocarbons.

Product Overview:

Polyurethane pump parts /PU parts/Polyurethane Parts/OEM Slurry Pump Parts /OEM Slurry Pump /OEM Impeller/ OEM High Chrome Alloy Pump Parts

Related other Products

NAIPU Main Pump Material
Material	Description	Application	Pump Parts
A05	High Chrome Alloy Cr26	neutral ,resistant to alkali but not acid	Impeller,Liners
A49	Low Carbon High Chrome Alloy Cr26	usually in desulphurization condition	Impeller,Liners
A51(A33)	Wear Resistant and Abrasion resistant alloy	usually in phosphuric acid,desulphurization and Sulfuric acid working conditions	Impeller,Liners
C21	Martensitic Stainless Steel		Shaft Sleeve,Locating Sleeve
C23	Austensitic Stainless Steel		Lantern Ring,Lantern Restrictor,Packing Gasket
D21	Ductile Iron		Cover Plate,Frame Plate,Bearing Housing ,Frame
D81	Galvanized Ductile Iron		Packing Gland
E02	20# Steel
E62	20# Galvanised Steel
E05	45# Steel		Shaft ,Shaft Key
E65	45# Steel
G01	HT200
G61	Gray Iron	Base ,Bearing Housing,Frame Plate/Cover Plate,Grease Retainer,Lower Strainer	Labyrinth Ring,End Cover
J04	C21 Alumina Plating		Usually white color ,Shaft Sleeve
J05	C21 Chromic Oxide Plating		Usually black color,Shaft sleeve
Q21	Aramid fiber ,yellow		Packing
R08	Natural Rubber		impeler
R26			impeller
R33	Natural Rubber		cyclone liners,pump liners,impeller etc.
R38	Natural Rubber		impeller
R55	Natural Rubber		impellers,liners
S01	EPDM	Acid Resistant but not wear resisting,high temperature	Discharge Gasket,Intake Gasket,Volute Liner Seal ,also for wet end parts
S10	Nitrile Butadiene Rubber		O Rings
S12			impeller, liners
S31	Hypalon
S21	Butyl Rubber	high temperature resistant and antioxidant	impellers,liners
S42	Neoprene Rubber	High Temperature resistant ,weather resistance,ozone resistance,Grease Resistance	impeller,Liners
U01	Polyurethane	Tension Resistance,High Tensile strength	impeller,Liners
S44	Neoprene Rubber
S50	Fluororubber	High Temperature and acid resistant,	Gasket ,wet end parts
Y08	Ceramic
J31			Shaft Sleeve
J26	Ceramic coated stainless steel	J26 consists of Y03 Ceramic Coating deposited onto a C26 substrate using a special spray technique.The coating is very hard and offers excellent abrasive wear resistance.The spray technique gives a coating with minimal porosity and excellent interlayer bond strength.J26 is expansion and will not spall.

Basic Part No.	Material Code	Part Name
001	E62	Adjusting Screw
003	G01	Base
005		Bearing Assembly
011	E62	Clamp Washer
013	D20	Cover Plate
015	E62	Cover Plate Bolt
017	R26A	Cover Plate Liner
018	R26A	Cover Plate Liner (Half)
024	E62	End Cover
028	G01	Expeller
029	G01	Expeller Ring
029R	R08A	Expeller Ring (Rubber)
032	D20	Frame Plate
034	E62	Frame Plate Bolt
036	R26A	Frame Plate Liner
039	E63	Frame Plate Stud
041	A05A,R26A	Frame Plate Liner Insert
043	R26A	Frame Plate Liner (Half)
044	K24	Gland Assembly
060	R08A	Intake Joint
062	D70	Labyrinth
063	K31	Lantern Ring
064	S18	Impeller O-Ring
067	E62	Neck Ring
070	E05	Shaft Key
073	E05	Shaft
075	D20	Shaft Sleeve
076	D20	Shaft Sleeve (Long)
078	G01	Stuffing Box
081	E02	Keeper Plate
083	A05A,R26A	Throat Bush
085	E02	Cotter
090	S10	Lip Seal
109	S18	Shaft O-Ring
110	A05A	Volute Liner
111	Q05	Packing
117	E62	Shaft Spacer
118	K31	Lantern Restrictor
118-1	K24	Lantern Restrictor(Low Flow)
122	R11A	Expeller Ring/Stuffing Box Seal
124	R08A	Volute Liner Seal
125	R08A	Volute Frame Seal
132	R08A	Discharge Joint Ring
138	E62	Grease Cup Adaptor
179	C23	Shaft Sleeve Spacer
210	S46	Shaft O-Ring
217	S18	Impeller O-Ring
239	C23	Impeller Release Collar
241	K24	Lip Seal Gland
302	E02	Lifting Tube
303	E02	Locating Nut
304	E02	Volute Lifting Beam
306	E02	Shaft Wrench
310	E02	Stuffing Box / Expeller Ring
425	R08A	Dyna Seal
430	U14	Nut Covers
005		Bearing Assembly
019	E02	Mounting Plate
041	A05A	Back Liner
064	S18	Impeller O-Ring
070	E05	Shaft Key
092	A05A	Casing
102	E02	Column
116-1	R10A	Strainer - Upper (Rubber)
116-2	G01	Strainer-Upper (Cast Iron)
116-3	U02A	Strainer-Upper(Urethane)
116-4	C23	Strainer-Upper(SS Mesh)
116L	U01A	Strainer-Lower
125	R08A	Back Liner Seal
154	E02	Discharge Pipe
204	R00	Discharge Pipe Gasket
231	E02	Suction Pipe
290	E02	Spacer
293	E02	Discharge Pipe Support
306	E02	Shaft Wrench
430	U04A	Nut Covers
005		Bearing Assembly
019		Mounting Plate
041		Back Liner
064		Impeller O Ring
070		Shaft Key
092		Casing
102		Column
116		Strainer-Upper
116L		Strainer-Lower
153		Column Clamp
154		Discharge Pipe
290		Spacer
291		Socket Head Protectors
293		Discharge Pipe Support
306		Shaft Wrench
421		U-Bolt

Material Code	Applications	Remarks
G01	Casing,Frame,Bearing Housing,Stuffing Box,Stuffing Gland	Grey Iron
D21	Casing,Frame,Bearing Housing	Spheroidal Graphite Cast Iron
A05/A33	Impeller,Volute,Expeller,Throat Bush,FPL,Expeller Ring	High Chrome Alloy
A49	Impeller,Volute,Throat bush,FPL
R26/R33/R55	Impeller,Volute,Throat bush,FPL	Rubber
OEM Material	Special material for pumps and pump parts are available according to clients chemical component request.

Quality Control System:

We set various check points along the whole production line,which throughout Raw Material,Charging Material,Surface and Heat Treatment checking,Material Analysis,Spare Testing and Pump Testing etc.

We set established a strict QA and QC system,we can provide quality control records such as "Spectrum Detection" "Metallographic Microscope Inspection" "Block Test" Ultrasonic Flaw Detection" "Penetration Testing " etc.And related test reports to our clients if necessary,such as "Material Test Report" "Dimensional Test Report" "Rotor Balancing Test Report" "NDT Test Report" "Hardness Inspection Report" etc.