65QVL-SP Lengthening Sump Slurry Pump

65QVL-SP Lengthening Sump Slurry Pump

•      Product Introduction

65QVL-SP is SP sump slurry pump series.It is vertical slurry pump submerged  in water to work. The pump belongs to long shaft sump slurry pump,which can be applied to the condition of deep liquid level.This series of heavy duty slurry pump is designed for delivering abrasive, large particle and high-density slurries. The Pump needn't shaft sealing or sealing water.It is able to operate normally under condition of insufficient suction volume. Wet parts of this type pump are made of abrasion -resistant metal. 

         65QVL-SP  is widely applied to sewage treatment ,metallurgy, mining, coal, power plant, building materials industries and so on.

 •     Product Feature

1. Vertical, centrifugal and Single-casing structure.
2. The Impeller is double suction half-open structure, adopts wear-resistant alloy or rubber.
3. The bearing assembly is cylinder type structure, the bearing could be lubricated by grease.
4. The clearance between the impeller and the cover plate could be adjusted to ensure the   pump to operate at high efficiency point.
5. Needn`t shaft sealing or sealing water.
6. Direct drive, V-belt drive could be selected to connect with the drive.
7. The lengthened shaft series of sump pump can be applied to the condition of deep liquid level. This kind of pump has added guide bearing structure on the basis of standard pump, which makes the operation more stable and applies more widely. However, the bearing should be equipped with flush water.

1   Shaft                      

2  Cylindrical roller bearing           

3   Bearing housing                      

4   Bearing spacer    

5   Double row center conical roller bearing         

6   Mounting plate                        

7    Column support              

8    strainer                   

9   Rear liner                              

10   Impeller                                

11   Pump casing

12    Lower strainer      

13   Discharge pipe                      

14   Flushing pipe                         

15   Coupling part      

16    Middle supporting part     

 •      Range of Performance

Capacity     23.4~111m3/h

Head         5~29.5m

Discharge diameter: 65mm

 •      Drive Type

 •      Type Of Pump Inlet Construction

 •      Outline Drawing