SMSP40-PV Sump Slurry Pump

40PV-SP Sump Slurry Pump

•  Product Introduction

Our SMSP40-PV sump slurry pump is a vertical centrifugal sump slurry pump designed for delivering abrasive, large particle and high-density slurries and makes a high interchangeability with Warman slurry pump. Wet parts of this mud sump slurry pump are made of high chrome cast iron. This SP sump slurry pump is available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up. Even if the top inlet is not submerged, the pumping maintained. It need not shaft sealing or sealing water. SMSP40-PV vertical centrifugal submerged slurry pump is widely applied to sewage treatment, metallurgy, mining, coal, power plant, building materials industries and so on.

• Type Notation:  

For example: SMSP(SPR)150-SV(L) (SP: SP series Sump Pump; SPR: Rubber Lined Sump Pump;150: Discharge Diameter (mm); SV: Frame Type; L: Extension Type.)

•  Product Feature

1. Vertical, centrifugal and single-casing structure.

2. The impeller is open structure, be made of wear-resistant alloy.

3. The bearing assembly is a cylindrical structure, the bearing could be lubricated with grease.

4. The clearance between the impeller and the cover plate could be adjusted to ensure the pump to operate at high efficiency point.

5. Need not shaft sealing or sealing water.

6. Direct drive, V-belt drive could be selected to connect with the driver.

Capacity     19.44~43.2 m3/h

Head           4.5~28.5 m

Discharge diameter: 40mm

• Drive Type

 • Type Of Pump Inlet Construction

• Performance Curves

 • Outline Drawing