SMSPR40-PVL Lengthening Rubber Sump Pump

SMSPR40-PVL Lengthening Rubber Sump Pump

• Product Introduction

SMSR40-PVL Lengthening rubber sump pump is a long shaft vertical centrifugal slurry pump lined with rubber, which is one type of SPR sump slurry pump. It is designed for delivering abrasive, large particle and high-density slurries. This rubber lined single casing sump slurry pump has high interchangeability with Warman slurry pump, which is built from natural rubber. Natural rubber is the most commonly used material in abrasive pumping services where maximum particle size is below 12mm and where organic compounds that attack rubber are not present. This mud sump slurry pump is able to operate normally under condition of insufficient suction volume.  

•Type Notation:

 For example: SMSP(SPR)150-SV(L) (SP: SP series Sump Pump; SPR: Rubber Lined Sump Pump;150: Discharge Diameter (mm); SV: Frame Type; L: Extension Type.)

• Product Feature

1. Construction of pump inlet is available in three types: standard type with strainer, suction type with strainer, with agitator.

2. The lengthened shaft series of vertical centrifugal slurry pump could be applied to the condition of deep liquid level. It lengthens the shaft and adds the guide bearing on the basis of the standard pump, making its operation more stable and application more extensive, but flushing water should be attached to the guide bearing.

3. No submerged bearings.

4. No shaft sealing problems.

5. Vertical, centrifugal and single-casing structure.

6. The impeller is open structure, be made of natural rubber.

7. Heavy duty roller bearings, above mounting plate.

• Range of Performance

Capacity     17.28~39.6m3/h

Head          4~26m

Discharge diameter: 40mm

• Drive Type

• Type Of Pump Inlet Construction

• Performance Curves

• Outline Drawing