SMSPR150-SVL Lengthening Rubber Sump Pump

SMSPR150-SVL Lengthening Rubber Sump Pump

• Product Introduction

SMSPR150-SVL lengthening rubber sump pump is a 6-inch rubber lined long shaft sump slurry pump, which submerged in sumps or pits. Our SMSPR150-SVL rubber mud sump slurry pump is ideal for transporting abrasive and corrosive slurries, high density slurries, large particle sizes without sharp angles slurries. Applications of this rubber lined sump slurry pump include: coal preparation, chemical handling, minerals processing, sand and gravel and general tank, pit or hole-in-ground slurry applications. This type of heavy duty slurry pump has high interchangeability with Warman slurry pump, and is available in various standard lengths to suit common sump depths. A suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up.

•Type Notation:

 For example: SMSP(SPR)150-SV(L) (SP: SP series Sump Pump; SPR: Rubber Lined Sump Pump;150: Discharge Diameter (mm); SV: Frame Type; L: Extension Type.)

• Product Feature

1. The lengthened shaft series of vertical centrifugal submerged slurry pump could be applied to the condition of deep liquid level. It lengthens the shaft and adds the guide bearing on the basis of the standard pump, making its operation more stable and application more extensive, but flushing water should be attached to the guide bearing.

2. Construction of pump inlet is available in three types: standard type with strainer, suction type with strainer, with agitator.

3. Heavy duty roller bearings, above mounting plate.

4. No submerged bearings.

5. No shaft sealing problems.

6. The impeller is open structure, be made of natural rubber.

7. Vertical, centrifugal and single-casing structure.

1   Shaft                   

2  Cylindrical roller bearing           

3   Bearing housing                      

4   Bearing spacer    

5   Double row center conical roller bearing

6   Mounting plate                        

7    Column support              

8    strainer                   

9    Rear liner                              

10   Impeller                                

11   Pump casing

12    Lower strainer      

13   Discharge pipe                       

14   Flushing pipe                         

15   Coupling part      

16   Middle supporting part   

• Range of Performance

Capacity     108~460.8m3/h

Head           7~36m

Discharge diameter: 150mm

• Drive Type

• Type Of Pump Inlet Construction

• Performance Curves

• Outline Drawing