Shijiazhuang EFU Machinery Co., Ltd
Shijiazhuang EFU Machinery Co., Ltd
Unpowered Gravity Roller Conveyor
  • Unpowered Gravity Roller Conveyor
  • Unpowered Gravity Roller Conveyor
Unpowered Gravity Roller Conveyor
Unpowered Gravity Roller Conveyor

Unpowered Gravity Roller Conveyor

  • $1000.00
    ≥1 Set/Sets
Min. Order:
1 Set/Sets
Min. Order:
1 Set/Sets
Transportation:
Ocean, Land, Air
Port:
TianJin, GuangZhou, QingDao
Quantity:

Your message must be between 20 to 2000 characters

Contact Now
Basic Info
Basic Info
Payment Type: L/C,T/T,Paypal
Incoterm: FOB,CFR,CIF,EXW
Transportation: Ocean,Land,Air
Port: TianJin,GuangZhou,QingDao
Product Description
Product Description

Unpowered roller conveyor is also called roller conveyor. 



Structure and characteristics

Separating Line


There are two kinds of long roller table and short roller table. The roller surface shape of the long roller table has cylindrical, conical and curved surface shapes, and the cylindrical long roller table is the most widely used.

The curved section of the roller table adopts conical rollers or double-row cylindrical rollers, which can turn the goods. Short roller table can shorten the distance between the rollers and lighter weight.


roller conveyor system unpowered roller


Specification performance

Separating Line


1.The roller table generally inclines slightly. When the article is heavier and the line is long, in order to save effort when pushing the article, the slope can be 1~1.5%.

2.If you want to make things self-slip, the slope can be increased to 2 to 3%. There are many factors that affect the degree of self-sliding, and most of them use experiments to determine the appropriate angle.
3.When the length of the line is less than 10 meters and the article is lighter than 200 kg, it can be arranged as a horizontal line. The self-sliding roller table is not easy to control the sliding speed of the article, so the length is generally not large.
4.The width of the roller table is 100-150 mm larger than the width of the article. The minimum radius of curvature of the curve section is 3 to 4 times the width of the roller table.
5.The distance between the rollers is 1/3 to 1/4 of the length of the conveyed articles, when the stability of the conveying of articles is required. The spacing can be 1/4 to 1/5 of the length of the conveyed article. The diameter of the roller is determined by the load.

Send your message to this supplier

  • Ms. Maria

  • Enter between 20 to 4,000 characters.